popular post of all time

new posts

DIFFERENCES BETWEEN MONOGASTRIC AND RUMINANT ANIMAL DIGESTIVE SYSTEM

DIFFERENCES BETWEEN MONOGASTRIC AND RUMINANT ANIMAL DIGESTIVE SYSTEM MONOGASTRIC ANIMAL RUMINANT ANIMALS Possesses only one stomach 1. Po...

DISEASES OF CROPS


Important diseases of major crops

NAME OF DISEASE CAUSATIVE PATHOGEN CROPS AFFECTED MODE OF SPREAD SYMPTOMS NATURE/EFFECT OF DAMAGE PREVENTION & CONTROL
Smut Fungus (Ustilago spp) Maize, Rice, grain sorghum and other cereals By wind Grains are covered with large mass of spores The wole cob may be covered with mass of black spores thereby rendering them valueles Use clean seed s to plant. Treat seeds with fungicide
2 Streak Virus Maize By piercing and sucking insects Discoloured leaf surface forming streaks Reduces crop yield Early planting spray with insecticide. Rogue the affected plants
3 Blast of Rice Fungus (Pyricularia oryzae) Rice By wind Dead areas sho on lead surface Crop yield is reduced Grow resistant varieties. Treat seeds with fungicides
4 Leaf Rust Fungus (Punccinia spp) All cereals Wind and water Rust-coloured pustules develop on the leaves of the plant The leaves die resulting in poor production Early planting. Dress seed with fungicides.
5 Bacterial Blight Bacteria Sorghum cowpea, etc Wind and water Yellow leaves followed by defoliation and death of stem Yield is affected Grow resistant varieties. Use clean seeds.
6 Cercorspor a leaf spot Fungus (cercospora spp) Legumes By wind Yellow leaves followed by defoliation Yield is reduced 1. Plant early
2. Uproot affected plants and burn.






Rosette of groundnut Virus Groundnut By aphids, piercing and sucking insects Leaves are closely packed, wrinkle and mottled The leaves curl, turn yellow and this reduces yield. 1. Plant early
2. Use resistant varieties
3. Rogue affected plants
8 Mosaic Virus Cassava
Yam By Bemisia fly Yellow pale areas on leaves Leaf distortion and stunting of plant leading to reduced yield 1. Use resistant varieties
2. Use insecticide to kill the insects
3. Destroy the affected plants.
9 Tuber Rot Nematode, fungus Yam Through soil Yam tuber becomes brown in the tissues and later becomes soft. Renders the tuber valueless 1. Destroy affected tubers
2. Use Aldrin dust
3. Use Nematicide e.g. Mucap.
10 Roo knot Nematode (Root knot eel worm) Tomato and okra Through soil borne Nematode Knots in the roots of plants Wilting and retardation of growth and low yield. 1. Crop rotation
2. Use nematicides
11 Downy mildew Fungus Onion Airborne fungus White coating on leaves Underdeveloped or small bulbs 1. Spray with sulphide of potassium
12 Sigatoka Fungus Banana and plantain Airborne fungus Chlorosis of leaves Small bunches and few fingers in bunches 1. Clean weeding and good spacing
2. Use appropriate fungicids
13 Damping off Fungus Okra Airborne-disease and soil borne fungus Rotting of roots and wilting of leaves Yield is reduced 1. Treat soil with fungicides
14 Leaf blotch Fungus Pineapple By airborn fungus Streak on the entire leaf surface Yields are reduced Use copper fungicide to spray affected plants
15 Black arm Bacteria (Xanthomonas malyaccarum rain fungus (Phytophthora palmivora) Cotton Through the stoma Angular sports on leaves Cotton bolls rot. Use resistant varieties
16 Black pod of Cocoa Rain splash, insects and animals Brown spots on pod leading to rotten and black pods The pods become useless leading to reduction in yield 1. Regular weeding of farm
2. Remove and bury all affected pods
3. Spray with fungicide like perenox and Bordeaux mixture
17 Swollen shoot Virus Cocoa By Nymphs or meaty bug and white flies Swelling on the growing parts of the stem and roots Distorted leaves and reduced growth in plants. There is underdevelopment of pods and low yield 1. Destroy all affected plants
2. Use resistant varieties






18 Freckle Fungus Oil palm By wind insects Brown spots on leaves which later dry and die Growth of palm is affected and maturity is delayed 1. Spray with fungicides such as captan, or diethane M45
19 Collar Rot Fungus (Ganoderma Lucidum) Oil palm Soil and wind borne fungus Rotting of old palms near the base of truck The disease can kill the palm tree 1. Disinfect with fungicides
2. Burn all infected trees
20 Antrannose Fungus Oil palm By wind and insects Leaves show clear spots. Spots turn dark-brown or black later and with yellow halo. Growth is affected in the nursery 1. Space germinating seedlings properly
2. Cut off affected parts of leaved and burn
3. Spray with fungicides, Cumin, Dithane M45, cAptan or Ziran in pre-nursery
21 White root Fungus (Fumes lignosus) Rubber Through the soil Leaf defoliation Taproots are attacked by fungi leading to the breakdown of their tissues. Plants die eventually 1. Burning farmland especially old trunks after clearing before planting of seedlings.
22 Mould Fungus Grains and seed By wind Formation of whitish spores on stored produce Grains or seeds are rendered useless 1. Proper drying of produce
2. Avoid dampy stores
3. Protect store from rain or flood.
23 Gummosis Fungus (Phytophhthrora spp) Citrus Through the soil and sided by moist condition The cortex of the citrus plant is killed Gum pockets occur in the cambium. There is exudation of gum from the stem The stem tissue collapse and plant may fall and die 1. Plant resistant varieties e.g. stocks or four orange and rough lemon
2. Bud citrus plants 45cm from the ground and allo no branch below 1m
3. Proper farm drainage and sanitation reduce incidence
24 Tristeza Virus Citrus Through aphid (Toxoptera citricida) Yellowing of terminal shoots in plants; there is stem pitting Growth and yield are affected. The disease can kill the citrus plants. Control by budding plants on Cleopatra tangerine, lake and Sampson. Tangelo stocks and rough lemon


7.3 Nature and Effect of Disease Damage to Crop
The nature of damage caused by a disease on crops depends on the type of disease causing organism.
It also depends on the crops being affected.
Generally, there is a reduction in, the yield of crops affected by the disease. The market value of the product is also reduced. It is estimated that crop diseases account for about 20% loss of yield in il crops all over the world. Disease attack also leads to i of planting materials.

7.4 Stages of Diseases Development and Transmission
There are four major stages of disease development and Ission in crops. These are:
1. Invasion: This is the stage where 'the disease causing agent comes in contact with the host plant.
2. Establishiment
At this stage the disease causing agent enters and establishes llf in the crop tissues.
3. Injury
This is the stage where the disease pathogen multiplies itself leading to the actual attack of the host.
4. Mission/Spread
This is the stage where the disease organism spreads from one plant to a healthy one. The process is aided by wind, water, insects contact and others.










Prevention and Control of Crop Diseases
It is better and more economical to prevent a disease from, crops than to control it when it has occurred. The sure way of cuting diseases, in farms is to prevent the disease causing organism from reaching the crops. This is possible through regular removal of rotten materials from the farm, routine spraying of crops planting resistant varieties and so on.

However, crop diseases can be controlled in the following ways:

1. Cultural Control
The techniques adopted in this control measure include:
(i) Proper care for plants such as regular weeding. This practice reduces the amount of disease attack on the crops.
(ii) Bunting, of farmland: This involves setting farmland on fire before cultivation. The fire helps to kill disease causing agent such as bacteria, fungi, virus and others in the soil.
(iii) Karly Planting: Early planting enables the crops to escape the outbreak of some crop diseases.
(iv) Practicing Crop Rotation: This practice, ensures that crop which suffer from similar diseases do not follow each other in the same rotation. This is to make sure that the cycle of the disease development is disturbed.
(v) Removal of dead plants and other disease harboring agents from the farm. The source of the disease is removed when this is done.
2. Biological Control
This involves the use of good resistant crops varieties to plant. It is a very successful method of controlling most serious plant diseases. Over the years, scientists have developed crop types which have great resistance to some deadly crop diseases. The use of which helps to control most diseases of crops.

3. Chemical Control
This involves the use of chemicals to kill the disease organism affecting the crops. For example: (i) Fungicides such as perenox. Bordeaux mixture, and copper sulphate are used in the
control of fungus diseases.
(ii) Virus diseases can be controlled by using appropriate chemicals such as vetox 85 to kill the vectors e.g. aphids. mealy-bugs white flies, etc. that transmit the virus diseases.
(iii) Most bacterial diseases can now be treated using appropriatle chemicals (bacteriacides) such as Agrosan 5W mercurial duss and acid.
(iv) Nematodes can be controlled by using nematicides such a nemagoiu and DDT.


1. Suite the main groups of disease organism giving examples in each group.
2. What are the confirmatory symptoms of disease affecting grains both in the field and in the store?
3. Explain with a diagram the stages of disease development
4. List four diseases of named crops. Describe the damages done by each disease to the crops.
5. List and explain the different methods by which crop disease can he controlled.
6. Suite three ways bacteria can be useful to man in his activities.
7. List three ways a farmer could prevent a disease from affecting his crops
NATURE AND EFFECT OF DISEASE
don't forget to use the comment box and leave a message or suggestion and we will get back to you within seconds.

You can read some of most interesting topics below

HERE YOU WILL FIND EVERY AVAILABLE TOPICS ABOUT AGRICULTURAL SCIENCE AND BIOLOGY. AND THE LINKS TO THEIR VARIOUS SOURCES.
1. DEVELOPMENT OF AGRICULTURE
2. IMPORTANCE OF AGRICULTURE
3. SUBSISTENCE AGRICULTURE
4. COMMERCIAL AGRICULTURE
5. PROBLEM OF AGRICULTURAL DEVELOPMENT
6. SOLUTIONS TO POOR AGRICULTURAL DEVELOPMENT
7. AGRICULTURAL LAWS AND REFORMS
8. ROLES OF GOVERNMENT IN AGRICULTURAL DEVELOPMENT
9. AGRICULTURAL POLICIES
10. PROGRAM PLANNING IN AGRICULTURE
34.
FORESTRY
35. WILDLIFE CONSERVATION
36. FACTORS AFFECTING LAND AVAILABILITY
37. TOPOGRAPHY
38. SOIL
39. BIOLOGICAL FACTORS
40. SOCIAL-ECONOMIC FACTORS
41. ENVIRONMENTAL FACTORS AFFECTING AGRICULTURAL PRODUCTION
42. CLIMATIC FACTORS AFFECTING AGRICULTURAL PRODUCTION
43. TEMPERATURE
44. RAINFALL
45. WIND
46. SUNLIGHT
47. SOLAR RADIATION
48. BIOTIC FACTOR AND AGRICULTURAL PRODUCTION
49. PESTS
50. BIRDS
51. DISEASES
52. SOIL MICRO-ORGANISMS







126. CROP ROTATION
133. FARM POWER AND MACHINERY
134. SOURCES OF FARM POWER
135. HUMAN SOURCE
149.
PLOUGHS
142.
FIELD MACHINES
157.
PLANTERS
164.
SIMPLE FARM TOOLS
165. AGRICULTURAL MECHANIZATION
166. THE CONCEPT OF MECHANIZATION

Please feel free to share while using our comment box below.
Thanks for sharing